The ADJ Entour Chill is a high-output, continuous low-lying fog machine, which uses standard water-based fog juice and ice cubes to generate an effect similar to that of dry ice. This latest addition to the Entour range of professional DMX-controlled effect generators builds on the success of ADJ’s immensely popular Mister Kool low-foggers, with enhanced technology to allow for increased output. A newly-developed 800W heater system allows for continuous output for up to an hour, while sophisticated new electronic temperature control lets the machine heat up in 3 minutes and stay at optimum temperature ready for immediate firing of the effect when it is required.
Specifications:
Features:
• 800W Low-lying fog stays low to the ground – similar to a dry ice effect
• New Heater system for continuous output with no additional warm-up time
• Uses standard water-based fog juice and ice cubes
• Continuous output (run up to one hour)
• No need for expensive fog chillers, bulky air conditioning units or dry ice
• New sophisticated electronic temperature control: heats up in 3 minutes and stays heated
• LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
Control:
• 1 DMX channel
• New LCD Display with 4-button system menu
• On-board controls: timer output, continuous output
• Includes ADJ's FFFTR MK II wired timer remote control. Features: Timer On/Off, Continuous and manual fog and duration & interval potentiometers
Construction
• Fire resistant rugged plastic case
• Ice tank capacity: 2.5 kg.
• Fog Fluid tank: 1-liter internal tank
• Water drainage valve system allows for easy clean-up. Water drains directly into the provided plastic bag.
Electrical:
• Power On/Off switch
• Locking power connection
• AC 120V/60Hz or 240/50Hz (non switching)
• Power consumption: 820W max
Connections
• 3-pin DMX In/Out connections
• Locking power connection
• 6.3mm Jack for remote control
Dimensions / Weight:
• Dimensions (LxWxH): 420x297x273mm
• Weight: 7,8 kg.
PRO TIP #1: Make sure you tighten the knob on the ice hopper all the way down to prevent fog leakage.
PRO TIP #2: Make sure the water drainage value is open and drainage bag is lower than the Entour Chill so the melted ice water can flow easily into the bag
